One-Time Boot Menu optionsOne-Time Boot Menu options
Use the One-Time Boot Menu to select a UEFI boot option for a one-time boot override. The option you select does not modify your
predefined boot order settings. If you use a USB key or virtual media through the iLO Remote Console, exit and re-enter the System
Utilities to refresh this menu so that the devices appear.
Boot options include:Boot options include:
OS boot manager, such as Windows Boot Manager—Lists the boot manager for your installed OS.
Generic USB Boot—Provides a placeholder for any USB device that is bootable in UEFI. You can set the boot priority of this option,
and retain this priority for use with USB devices you might install in the future. Setting this priority does not affect priorities set for
individual USB devices in the UEFI Boot Order list.
NOTE:NOTE:
This option is only available in UEFI Mode. The system attempts to boot all UEFI bootable USB devices in the order
you specify in the Generic USB Boot entry, even if installed individual USB devices are configured lower in the boot
order.
Internal SD Card
Embedded Flexible LOMs
Embedded UEFI Shell
Embedded SATA Port
Run a UEFI Application from a file system —Enables you to select a UEFI application to run from a file system. You can browse all
FAT file systems that are available in the system. You can also select an x64 UEFI application (with an .EFI extension) to execute
(can be an OS boot loader or any other UEFI application).
Legacy BIOS One-Time Boot Menu —Exits and launches the Legacy BIOS One-Time Boot Menu , where you can select a specific
override option for this boot only. This option does not modify your boot order mode settings.
Embedded iPXE
To Next Page
Loading...
Need help?
General
