HP ProLiant Gen10 - Enabling or Disabling Backup ROM Image Authentication

Enabling or disabling backup ROM image authenticationEnabling or disabling backup ROM image authentication
ProcedureProcedure
1. From the System Utilities screen, select System Configuration > BIOS/Platform Configuration (RBSU) > Server Security > Advanced
Security Options > Backup ROM Image Authentication .
2. Select a setting.
Enabled: When enabled, a cryptographic authentication of the backup ROM image occurs on startup.
Disabled: When disabled, only the primary ROM image is authenticated on each startup.
3. Save your setting.
Enabling or disabling backup ROM image authentication 340