HP ProLiant Gen10 - Enabling or Disabling Memory Clear on Warm Reset

Enabling or disabling Memory Clear on Warm ResetEnabling or disabling Memory Clear on Warm Reset
Use the Memory Clear on Warm Reset option to configure when memory is cleared on warm resets. Disabling this option can save boot
time by skipping the clearing of memory on warm resets.
ProcedureProcedure
1. From the System Utilities screen, select System Configuration > BIOS/Platform Configuration (RBSU) > System Options > Boot
Time Optimizations > Memory Clear on Warm Reset .
2. Select a setting.
Enabled—Memory is cleared on all reboots.
Disabled—Memory is only cleared on a warm reset when requested by the operating system.
3. Save your setting.
Enabling or disabling Memory Clear on Warm Reset 121