HP ProLiant Gen10 - Setting the IPMI Watchdog Timer Timeout

Setting the IPMI Watchdog timer timeoutSetting the IPMI Watchdog timer timeout
Use IPMI Watchdog Timer Timeout to set the wait timer before performing the desired timeout action on the server, in the event of a
server lockup.
PrerequisitesPrerequisites
The IPMI Watchdog Timer is enabled.
ProcedureProcedure
1. From the System Utilities screen, select System Configuration > BIOS/Platform Configuration (RBSU) > System Options > Server
Availability > IPMI Watchdog Timer Timeout .
2. Select a wait time.
10 Minutes
15 Minutes
20 Minutes
30 Minutes
3. Save your setting.
Setting the IPMI Watchdog timer timeout 147