HP ProLiant Gen10 - Adding the Embedded Ipxe to the UEFI Boot Order List

Adding the Embedded iPXE to the UEFI Boot Order listAdding the Embedded iPXE to the UEFI Boot Order list
PrerequisitesPrerequisites
Boot Mode is set to UEFI Mode.
ProcedureProcedure
1. From the System Utilities screen, select System Configuration > BIOS/Platform Configuration (RBSU) > Network Options >
Embedded iPXE > Add Embedded iPXE to Boot Order .
2. Select a setting.
Enabled— Adds the Embedded iPXE to the boot order list on the next reboot.
Disabled— The Embedded iPXE is not added to the boot order list.
3. Save your setting.
Adding the Embedded iPXE to the UEFI Boot Order list 234