HP ProLiant Gen10 - Configuring the Memory Refresh Rate

Configuring the Memory Refresh RateConfiguring the Memory Refresh Rate
The Memory Refresh Rate option controls the refresh rate of the memory controller and might affect the performance and resiliency of
the server memory. It is recommended that you leave this setting in the default state unless indicated in other documentation for this
server.
ProcedureProcedure
1. From the System Utilities screen, select System Configuration > BIOS/Platform Configuration (RBSU) > Memory Options > Memory
Refresh Rate.
2. Select a setting.
1x Refresh
2x Refresh
3. Save your setting.
Configuring the Memory Refresh Rate 165