Configuring an embedded video connectionConfiguring an embedded video connection
ProcedureProcedure
1. From the System Utilities screen, select System Configuration > BIOS/Platform Configuration (RBSU) > Advanced Options >
Embedded Video Connection.
2. Select a setting.
Auto—The external video connection to the embedded video controller is automatically disabled to save power when a monitor
is not attached. It is enabled automatically when a monitor is attached (including when the server is operating).
Always Disabled—The external video connection to the embedded video controller is disabled, and a monitor connected to this
port does not display except during system boot.
Always Enabled—The external video connection to the embedded video controller is always enabled. This option is only
required if a monitor is attached with a monitor detection that does not function, causing Auto mode to not work properly.
3. Save your setting.
To Next Page
Loading...
