Configuring advanced debug optionsConfiguring advanced debug options
PrerequisitesPrerequisites
Boot Mode is set to UEFI Mode.
Use Advanced Debug Options to control the output level of debug and POST boot progress messages.
ProcedureProcedure
1. From the System Utilities screen, select System Configuration > BIOS/Platform Configuration (RBSU) > Advanced Options >
Advanced Debug Options.
2. Select settings.
UEFI Serial Debug Message Level —Sets the level of debug messages output to the serial console.
Disabled
Errors Only
Medium
Network
Verbose
NOTE:NOTE:
This setting can significantly increase boot time.
Custom
POST Verbose Boot Progress —Enables detailed messaging that might be helpful in determining why a server became
unresponsive during the boot process.
Disabled
Serial Only—Detailed messages are output to the serial console.
All—Detailed messages are output to the POST screen and serial console.
3. Save your settings.
To Next Page
Loading...
