HP ProLiant Gen10 - Setting the Energy;Performance Bias

Setting the Energy/Performance BiasSetting the Energy/Performance Bias
Use the Energy/Performance Bias option to configure several processor subsystems to optimize the processor’s performance and power
usage.
PrerequisitesPrerequisites
Workload Profile is set to Custom.
ProcedureProcedure
1. From the System Utilities screen, select System Configuration > BIOS/Platform Configuration (RBSU) > Power and Performance
Options > Energy/Performance Bias.
2. Select a setting.
Maximum Performance—Provides the highest performance and lowest latency. Use this setting for environments that are not
sensitive to power consumption.
Balanced Performance—Provides optimum power efficiency and is recommended for most environments.
Balanced Power—Provides optimum power efficiency based on server utilization.
Power Savings Mode—Provides power savings for environments that are power sensitive and can accept reduced performance.
3. Save your setting.
Setting the Energy/Performance Bias 263