Changing the POST video support settingsChanging the POST video support settings
Use this option to configure the POST Video Support setting. This option is only supported in UEFI Boot Mode and only applies to video
output during the POST (preboot) environment.
ProcedureProcedure
1. From the System Utilities screen, select System Configuration > BIOS/Platform Configuration (RBSU) > Advanced Options > Video
Options.
2. Select a setting:
Display All: The system displays POST video to all installed video controllers.
Display Embedded Only: The system only displays POST video to the embedded video controller.
3. Save your setting.
To Next Page
Loading...
