HP ProLiant Gen10 - Enabling or Disabling Extended Memory Test

Enabling or disabling Extended Memory TestEnabling or disabling Extended Memory Test
Use the Extended Memory Test option to configure whether the system validates memory during the memory initialization process.
When enabled, and uncorrectable memory errors are detected, the memory is mapped out, and the failed DIMMs are logged to the IML.
NOTE:NOTE:
Enabling this option might significantly increase boot time.
ProcedureProcedure
1. From the System Utilities screen, select System Configuration > BIOS/Platform Configuration (RBSU) > System Options > Boot
Time Optimizations > Extended Memory Test.
2. Select a setting.
Enabled
Disabled
3. Save your setting.
Enabling or disabling Extended Memory Test 118