HP ProLiant Gen10 - Changing Storage Options; Storage Device Configuration; Embedded SATA Controller Support; Power and Performance Tuning

3.8.5.6 Setting the network location for the Embedded iPXE auto-start script
3.9 Changing Storage Options
3.9.1 Enabling embedded chipset SATA controller support
3.9.2 Enabling SATA Secure Erase
3.9.3 Enabling SATA Sanitize
3.9.4 Setting the embedded storage boot policy
3.9.5 Setting the PCIe storage boot policy
3.9.6 Changing the default Fibre Channel/FCoE scanning policy
3.9.7 Enabling or disabling Embedded NVM Express Option ROM
3.9.8 Configuring Intel® CPU VMD Support
3.9.9 Configuring Intel® PCH VMD Support
3.9.10 Configuring Intel® VROC Support
3.9.11 Decommissioning NVM Express drives
3.10 Changing Power and Performance Options
3.10.1 Enabling or disabling AMD Performace Workload Profile
3.10.2 Setting the Power Regulator mode
3.10.3 Configuring PCI Peer to Peer Serialization
3.10.4 Configuring IO Direct Cache
3.10.5 Setting the minimum processor idle power core C-State
3.10.6 Setting the Minimum Processor Idle Power Package C-State
3.10.7 Enabling or disabling AMD Data Fabric C-State
3.10.8 Enabling or disabling Intel Turbo Boost Technology
3.10.9 Configuring AMD Core Performance Boost
3.10.10 Enabling or disabling AMD Fmax Boost Limit Control
3.10.11 Changing the AMD C-State Efficiency Mode
3.10.12 Setting the Energy/Performance Bias
3.10.13 Setting the AMD Infinity Fabric Performance State
3.10.14 Enabling or disabling collaborative power control
3.10.15 Configuring AMD XGMI Force Link Width
3.10.16 Configuring AMD XGMI Max Link Width
3.10.17 Setting Intel DMI Link Frequency
3.10.18 Configuring AMD Preferred IO Bus Number
3.10.19 Configuring AMD NBIO LCLK DPM Level
3.10.20 Setting NUMA Group Size Optimization
3.10.21 Enabling or disabling Intel Performance Monitoring Support
3.10.22 Configuring Uncore Frequency Scaling
3.10.23 Setting UPI Bandwidth Optimization (RTID)
3.10.24 Enabling or disabling Sub-NUMA Clustering
3.10.25 Enabling or disabling the Energy Efficient Turbo option
3.10.26 Setting a Local/Remote Threshold
3.10.27 Setting the LLC Dead Line Allocation
3.10.28 Setting the Stale A to S
3.10.29 Disabling Processor Prefetcher Options
3.10.30 Enabling or disabling I/O Options