FusionModule2000 Smart Modular Data Center
Installation Guide
10 Installing the Aisle Containment
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Figure 10-1 Installing a sealing plate
Step 4 Secure sealing plates to the floor using ST4.8x25 self-drilling tapping screws and washers, as
shown by (2) in Figure 10-1.
The number of screws used for securing the sealing plate must be the same as the number of
corresponding holes in the lower end of the plate.
Step 5 Install other sealing plates in the same way.
Step 6 Connect adjacent sealing plates using three M6x16 screws with flat washers and nuts, as
shown by (3) in Figure 10-1.
----End
To Next Page
Loading...
