7 Configuration
114
7.7 Digital inputs
The digital inputs (optional extra) are actuated with an external voltage DC 0/24 V or via a potential-free
contact (auxiliary voltage in place).
The digital inputs are pooled into groups along with other digital signals in the "Groups" configuration and
are then available for further use via these groups.
Device dialog box
Parameter
7.7.1 Signal monitoring
Signal monitoring (alarm) can be activated for each digital input.
In alarm cases, an alarm signal is activated. Depending on the configuration, an entry is made in the
event list or additionally in the alarm list. In the latter case, the alarm/event text is displayed in the status
bar (until another alarm occurs); the collective alarm is enabled, and the plotter trace may be displayed
in a different color.
Parameter Selection/settings Description
Channel designa-
tion
DI ...
Use default text or enter other text.
Name (abbreviation) with max. 5 charac-
ters that is used in the visualizations.
Channel descrip-
tion
Digital input ...
Use default text or enter other text.
Description (designation) with max. 21
characters
Signal inversion Inversion of the input signal
No The signal is not inverted.
Yes The signal is inverted.
To Next Page
Loading...
