5 Operation
40
5.2 Main menu
The main menu contains functions for configuring, parameterizing, and operating the device.
View
5.2.1 Logon
This is the menu in which users log on and off, and change their passwords.
The following IDs, names, and passwords are set by default:
Further information: see the operating manual, chapter "Configuration - only in setup program" > "User
list" > "Default user settings".
Logoff with signature
With extra code 888 (FDA) and with the corresponding configuration in the PCS software, an electronic
signature is required when logging off. The signature applies to the entire time period for which the user
was logged on.
Configuration of the electronic signature: see operating manual, chapter "Configuration - only in setup
program" > "Electronic signature".
Example of an electronic signature:
(1) Menu items (3) Scroll up
(2) Quit main menu (4) Scroll box (current position within the
menu); movable
(5) Scroll down
Users ID Name Password
User 1 Master System Master 9200
User 2 User 1 Data Management 1
User 3 User 2 Data Management 2
User 4 User 3 Data Management 3
User 5 Service Service 9200