5 Operation
44
5.3.2 Event list
The event list contains event entries in chronological order. A maximum of 150 entries are stored and
displayed. When new entries are added, the oldest entries are deleted. The event list is kept after power
off.
As with process data, events are transferred to the PC Evaluation Software PCA3000 for evaluation.
The events include:
• System messages (e.g., power on, configuration change, time sync)
• Device alarms (malfunctions; e.g., battery discharged, data loss, input not calibrated)
• Configured alarms
• Configured events
• Counter messages (counter status and counter reset)
• Batch messages (start and end of batch recording)
• General messages (e.g., comments, error messages from the interfaces, USB flash drive plugged
in/removed, collective alarm acknowledged)
View
(1) Event (here: alarm) with time and event
text (configurable)
(3) Update event list
(2) Quit event list
To Next Page
Loading...
