JUMO LOGOSCREEN 601 - Text Image

5 Operation
52
5.4.4 Text image
The text image shows the current values for the analog signals configured for the relevant group as num-
bers. The digital signals – depending on their logical state – are shown as colored areas or frames.
Group view
(1) Designation (pointer) and signal abbrevi-
ation (configurable) of the analog signal
(4) Digital signal with signal abbreviation
(configurable) and designation (pointer)
(2) Current value of analog signal Displays the logical state:
Colored area = HIGH (B1, B3)
Colored frame = LOW (B2)
(3) Call up individual view of analog signal
(numerical view and bar graph)
In the individual view, all digital signals of
the group are also displayed.
(5) Go to next active group
(2)
(1)
(4)
(5)
(3)