9 Configuration – in setup program only
202
9.2 User list
The user IDs, names, and passwords for various users are assigned in the user list, and the user rights
are managed. The system supports up to five users with varying rights.
These settings are crucial for logging onto the device. They are not authoritative for logging into the setup
program.
Additionally, public rights are defined here. These rights are used if there is no user logged on to the de-
vice.
NOTE!
In a device without extra code 888 (FDA), the "Transmit user separately" parameter decides whether the
user table (user ID and name, password, group assignment) is transferred separately from the configu-
ration and the user groups to the device.
See chapter "Parameterization" > "System data".
NOTE!
A device with extra code 888 (FDA) does not have this function available in the setup program because
the user list can only be created with the PC Security Manager software PCS. Up to 50 users can be
administered like that; the "Manage users" right is required here.
See operating manual for PC Security Manager software PCS (B 709703.0 or 70970300T96...).
Setup dialog box
Parameter
Parameter Selection/settings Description
Password rules Press button chapter 9.2.2 "Password rules",
Page 204
Character table Press button chapter 9.2.3 "Character table",
Page 205
To Next Page
Loading...
