203
9 Configuration – in setup program only
Group 1 ... ...Group 15, Public rights
Up to 15 groups are provided for assigning user rights; specific rights are assigned to these groups. An
individual name can be assigned to each group in order to make it easier to distinguish the groups (e.g.
"Master", "Users", "Service"). The rights assigned to the group "Public rights" are valid for users who are
not logged on.
User 1 ... User 5
Up to 5 users can be managed; each user can be assigned to one or multiple groups. As a result, the
user receives the rights of the relevant group.
Group 1 ...
Group 15,
Public rights
Select relevant user group from the drop-
down list.
The following parameters "Group desig-
nation" and "Rights" refer to the selected
user group.
The rights for users that are not logged
on are defined by selecting "Public
rights".
Group designa-
tion
Use the default designation or enter a
different designation.
Use a text for the designation that de-
scribes the function (rights) of the user
group.
Rights Press button Rights of the user group
chapter 9.2.5 "User rights",
Page 207
User 1 ...
User 5
Select relevant user from the drop-down
list.
The default settings for the relevant user
are displayed and can be changed by the
operator.
chapter 9.2.1 "Default user settings",
Page 204
ID Use default ID or enter other ID. The ID (user ID) is displayed in the user
list for logon.
Name Use default name or enter other name. Use a text for the name that describes
the function (rights) of the user.
The name is not displayed or prompted
for at logon time.
Password Use the default password or enter a dif-
ferent password.
The password is requested for logon.
Group assign-
ment
Select one or several user groups (select
checkbox).
The relevant user gets the rights of the
selected user group.
Parameter Selection/settings Description
To Next Page
Loading...
