19
3 Mounting
3 Mounting
3.1 General information on mounting
WARNING!
The device is not designed for use in potentially explosive areas.
Explosion hazard.
Only deploy the device outside of potentially explosive areas.
Mounting site
The device is designed for installation in a panel cut-out. The front of the device and housing have dif-
ferent protection types (see technical data).
Climatic conditions
The ambient temperature and the relative humidity at the mounting site must correspond to the technical
data. Aggressive gases and vapors have a negative effect on the operating life of the device. The mount-
ing site must be free from dust, powder, and other suspended solids.
Installation position
Any installation position may be chosen, however the screen view angle must be taken into consider-
ation (see technical data).
Technical data
chapter 11.1 "Technical data", Page 265
To Next Page
Loading...
