7 Configuration
96
7.2 Basic device (setup only)
This menu item is used to change device hardware (optional plug-in boards) and optional functions (ex-
tra code, e.g., math/logic) in the current setup project. The following options are available for this pur-
pose:
• User-defined creation: Device hardware and optional functions are selected by the user in the setup
program.
• Automatic detection: Device hardware and optional functions are read out from the connected device
and transferred to the setup program.
• Automatic detection with read out of setup file: The configuration is additionally read out from the de-
vice here and transferred to the setup program.
Setup dialog box
To Next Page
Loading...
