193
8 Parameterization
8.2 Counters/integrators
This function is used to change the current counter/integrator status (e.g., to 0 or any other value). The
counter/integrator continues to run with this new value, but the period for adding the total is not restarted.
The change is logged in the event list specifying the old and new values and is only effective once. The
old value is not stored.
Device dialog box
Parameter
Parameter Selection/settings Description
Current value (Display only) Displays the current counter/integrator
status
Start value -999999999 to 0 to +999999999 New start value for the counter/integrator
To Next Page
Loading...
