7 Configuration
134
7.14.2 Specific settings
Device dialog (excerpt) – counter/integrator 1 ...
Parameter
Parameter Selection/settings Description
Function Operating mode of the counter/integrator
Inactive Counter/integrator is switched off.
Counter Counter for the pulses of a digital signal
Integrator Integration of an analog signal
Flow ... (total) Integration of volume flow (determining
the total flow)
Operating time Determination of the length of time that a
digital signal is active.
High-speed counter ... Counting of the pulses of a digital signal
up to 12.5 kHz; only available if the nec-
essary digital input/output is in place.
Save (for evalua-
tion)
The result (status of the counter/integrator) can be saved in order to evaluate it with
the PCA3000 evaluation software.
No Event is not saved.
Yes Event is saved.
To Next Page
Loading...
