213
9 Configuration – in setup program only
NOTE!
Email transmission should be tested in the scope of startup. If there is an error, this leads to an entry with
an error code in the device's event list.
The interface description contains a list of all error codes ("Error codes as integer return values").
9.4.1 Email server
NOTE!
The following settings may only be performed by qualified personnel.
Setup dialog box
Parameter
Parameter Selection/settings Description
Authentication Authentication at logon to email server
None No authentication
SMTP-Auth Authentication with user name and pass-
word on SMTP server
User name User name (max. 64 characters) for logging onto the email server
Your user name
(Example)
Enter name (also applies if Authentica-
tion = no).
Password Password (max. 64 characters) for logging on to the email server
Your password
(Example)
Enter password (only for SMTP Auth).
SMTP server Address (URL, max. 64 characters) of the email server for SMTP
smtp.example.net
(Example)
Enter server address.
Encryption Type of encryption between email client and email server (depending on the email
provider)
None Unencrypted
TLS Transport Layer Security (formerly: SSL)
StartTLS TLS where the connection is unencrypt-
ed to begin with (encryption takes place
while the connection is being estab-
lished)
To Next Page
Loading...
Need help?
General
