7 Configuration
174
Recipe header
The comment text can contain up to 400 characters (20 lines with 20 characters each); it is used to de-
scribe the batch. It is only transferred via an interface to the device (Modbus or barcode) and can only
be displayed with the PCA3000 PC evaluation software.
NOTE!
Before ending batch reporting, a comment text must exist on the device for it be added to the batch re-
port. After completing batch reporting, the comment text is deleted again. If it is to be used multiple times,
the user must resend it to the device for each instance of batch reporting.
Text selection bit ...
64 texts from the text list (batch texts) are available for selection by digital signals; the first selectable text
is determined by the "First text" parameter of the batch line.
First text + binary number = text number
Text selection bit 0 has a priority of 2
0
, text selection bit 1 a priority of 2
1
, etc.:
Examples:
First text = 1; text selection bits: 000000 (= 0); text number = 1 + 0 = 1 (text 1)
First text = 1; text selection bits: 111111 (= 63); text number = 1 + 63 = 64 (text 64)
First text = 65; text selection bits: 111111 (= 63); text number = 65 + 63 = 128 (text 128)
If there is no text at the selected point in the text list (or if the value is outside the value range), no entry
is made in the batch line (existing text is deleted).
Recipe header Recipe
Use default text or enter other text.
For a completed batch, the recipe head-
er is displayed as a title above a com-
ment text (e.g., Recipe).
Text selection bit
0
to
Text selection bit
5
Digital selector
No selection
Bit 0 (LSB) to bit 5 (MSB) form a binary
number which defines a text from the text
list (batch texts), taking the text offset
into account.
Parameter Selection/settings Description
Bit 5 Bit 4 Bit 3 Bit 2 Bit 1 Bit 0 Decimal val-
ue
0000000
0000011
0000102
0000113
.......
11111163
0 = "No selection" in the digital selector or signal is inactive.
1 = Signal selected and signal is active (high active).