EasyManuals Logo

JUMO LOGOSCREEN 601 User Manual

JUMO LOGOSCREEN 601
280 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #179 background imageLoading...
Page #179 background image
179
7 Configuration
NOTE!
Transfer rate (10 Mbit/s or 100 Mbit/s) and duplex mode (half duplex or full duplex) are determined au-
tomatically.
NOTE!
The Ethernet parameters are shown in the device info (Main menu > Device info > Ethernet). In the event
of connection problems, check the current settings.
IP address assignment
NOTE!
If applicable, deactivate the DHCP to ensure that the device uses a fixed IP address.
Subnet mask
The subnet mask determines which part of the IP address designates the network and which part is avail-
able for addressing a device within a network. The length of the mask is 32 bits (IPv4), which is the same
length as an IP address.
Example: In a network with a mask of 255.255.255.0, the first 24 bits (from the left) are used for the net-
work address; these are set to "1" in the mask. The remaining 8 bits are set to "0" in the mask and can
be used for device addresses. There are therefore 254 device addresses available (256 - 2 because the
address 0 is assigned for the network itself and the address 256 is used for the broadcast).
Standard gateway
All network requests to addresses that do not belong to the relevant network are routed through the stan-
dard gateway.
DNS device name
The DNS device name is a symbolic name that can be used for addressing instead of an IP address.
If a DNS device name has been entered, it is communicated to the DHCP server so that the device can
be addressed with the name entered if the function is supported in the relevant network. If no DNS device
name has been entered, the device can only be addressed using the assigned IP address.
DNS device
name
MAC000cd8094ecd-TYP7065...
Admissible characters:
a ... z, A ... z, -, 0 ... 9 (max. 63 charac-
ters);
Name must start with a letter and must
not end with "-" (hyphen).
Example of a unique DNS device name
(assigned by default)
If necessary, the name can also be as-
signed individually, but it must be unique.
DNS server IP au-
tom.
Yes The IP address of the DNS server is au-
tomatically assigned.
No The IP address of the DNS server must
be entered manually.
DNS server 0.0.0.0 ... 255.255.255.255 IP address of the DNS server (for manu-
al input)
The IP address may need to be request-
ed from the administrator in question.
Parameter Selection/settings Description
?
?

Table of Contents

Other manuals for JUMO LOGOSCREEN 601

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the JUMO LOGOSCREEN 601 and is the answer not in the manual?

JUMO LOGOSCREEN 601 Specifications

General IconGeneral
BrandJUMO
ModelLOGOSCREEN 601
CategoryMeasuring Instruments
LanguageEnglish

Related product manuals