Connecting the MX960 Router to the Network | 357
Tools and Parts Required for MX960 Router Connections | 357
Connecting the MX960 Router to Management and Alarm Devices | 358
Connecting the MX960 Router to a Network for Out-of-Band Management | 358
Connecting the MX960 Router to a Management Console or Auxiliary Device | 359
Connecting an MX960 Router to an External Alarm-Reporting Device | 360
Connecting the MX960 Router to a Network for Out-of-Band Management | 362
Connecting the MX960 Router to a Management Console or Auxiliary Device | 363
Connecting an MX960 Router to an External Alarm-Reporting Device | 364
Connecting DPC, MPC, MIC, or PIC Cables to the MX960 Router | 365
Connecting the Alarm Relay Wires to the MX960 Craft Interface | 367
Initially Configuring the MX960 Router | 369
Initially Configuring the MX960 Router | 369
Installing and Replacing Components
Overview of Installing and Replacing Components | 377
MX960 Field-Replaceable Units | 377
Tools and Parts Required for MX960 Router Connections | 378
Installing Components | 381
Installing the MX960 Craft Interface | 382
Installing the MX960 Air Filter | 383
Installing an MX960 Fan Tray | 384
Installing an MX960 Routing Engine | 385
Installing an MX960 Switch Control Board | 387
Installing an MX960 DPC | 390
Installing an MX960 FPC | 393
Installing an MX960 MIC | 396
Installing an MX960 Dual-Wide MIC | 399
Installing an MX960 MPC | 403
Installing an MX960 PIC | 406
Installing a Cable on an MX960 DPC, MPC, MIC, or PIC | 408
Installing a MX960 AC Power Supply | 410
xi
To Next Page
Loading...
