CHAPTER 14
Unpacking the MX960 Router
IN THIS CHAPTER
Tools and Parts Required to Unpack the MX960 Router | 249
Unpacking the MX960 Router | 249
Verifying the MX960 Parts Received | 251
Tools and Parts Required to Unpack the MX960 Router
To unpack the router and prepare for installation, you need the following tools:
•
Phillips (+) screwdriver, number 2
•
1/2-in. or 13-mm open-end or socket wrench to remove bracket bolts from the shipping pallet
•
Blank panels to cover any slots not occupied by a component
RELATED DOCUMENTATION
Unpacking the MX960 Router | 249
Verifying the MX960 Parts Received | 251
MX960 Router Overview | 3
Unpacking the MX960 Router
The router is shipped in a wooden crate. A wooden pallet forms the base of the crate. The router chassis
is bolted to this pallet. Quick Start installation instructions and a cardboard accessory box are also included
in the shipping crate.
249
To Next Page
Loading...
