Juniper MX960 - SCBE2-MX Slot Locations in the MX Chassis

SCBE2-MX Slot Locations in the MX Chassis
For the MX960:
•
You can install up to three SCBE2-MX’s in the MX960 router chassis.
•
SCBE2-MX’s are installed vertically into the front of the MX960 chassis in the slots labeled 0, 1, and 2.
If any slots are empty, you must install a blank panel.
•
The two SCBE2-MX’s residing in slot 6 and slot 7 of the MX960 chassis provide both control and switch
fabric features, while the third SCBE2-MX residing in slot 8 of the chassis (hybrid slot) will only do fabric
functions.
For the MX480 and MX240 routers:
162