Figure 55: Contents of the Shipping Crate
RELATED DOCUMENTATION
Tools and Parts Required to Unpack the MX960 Router | 249
Verifying the MX960 Parts Received | 251
Installing the MX960 Router Using a Mechanical Lift | 276
Verifying the MX960 Parts Received
A packing list is included in each shipment. Check the parts in the shipment against the items on the packing
list. The packing list specifies the part numbers and descriptions of each part in your order.
If any part is missing, contact a customer service representative.
A fully configured router contains the router chassis with installed components, listed in
Table 107 on page 251, and an accessory box, which contains the parts listed in Table 108 on page 252. The
parts shipped with your router can vary depending on the configuration you ordered.
Table 107: Parts List for a Fully Configured MX960 Router
QuantityComponent
1Chassis, including midplane, craft interface,
front-mounting flanges, and center-mounting brackets
Up to 12DPCs
Up to 6FPCs
Up to 12MPCs
251
To Next Page
Loading...
