EasyManua.ls Logo

Juniper MX960 - Holding an MX960 FPC

Juniper MX960
761 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Slot 1 Online MX FPC Type 3
PIC 0 Online 1x OC-192 SONET
PIC 1 Online 1x OC-192 SONET
NOTE: An FPC takes up two DPC slots when installed on an MX Series router. The slot
number corresponds to the lowest numbered DPC slot.
For further description of the output from the command, see the CLI Explorer.
RELATED DOCUMENTATION
MX960 Flexible PIC Concentrator (FPC) LEDs | 77
Troubleshooting the MX960 FPCs | 659
Replacing an MX960 FPC | 492
Holding an MX960 FPC | 606
Storing an MX960 FPC | 611
Holding an MX960 FPC
CAUTION: Many components on the FPC are fragile. Failure to handle FPCs as
specified in this document can cause irreparable damage.
NOTE: An FPC configured with PICs installed can weigh as much as 18 lb (8.2 kg). Be prepared
to accept the full weight of the FPC as you lift it.
606

Table of Contents

Other manuals for Juniper MX960

Related product manuals