Juniper MX960 - Radiation and Laser Warnings; Laser and LED Safety Guidelines and Warnings; General Laser Safety Guidelines | 719

CHAPTER 37
Radiation and Laser Warnings
IN THIS CHAPTER
Laser and LED Safety Guidelines and Warnings | 719
Radiation from Open Port Apertures Warning | 723
Laser and LED Safety Guidelines and Warnings
IN THIS SECTION
General Laser Safety Guidelines | 719
Class 1 Laser Product Warning | 720
Class 1 LED Product Warning | 721
Laser Beam Warning | 722
Juniper Networks devices are equipped with laser transmitters, which are considered a Class 1 Laser
Product by the U.S. Food and Drug Administration and are evaluated as a Class 1 Laser Product per EN
60825-1 requirements.
Observe the following guidelines and warnings:
General Laser Safety Guidelines
When working around ports that support optical transceivers, observe the following safety guidelines to
prevent eye injury:
•
Do not look into unterminated ports or at fibers that connect to unknown sources.
•
Do not examine unterminated optical ports with optical instruments.
•
Avoid direct exposure to the beam.
719