Juniper MX960 Hardware Guide

CHAPTER 28
Routine Maintenance Procedures
IN THIS CHAPTER
Routine Maintenance Procedures for the MX960 Router | 589
Routine Maintenance Procedures for the MX960 Router
Purpose
For optimum router performance, perform preventive maintenance procedures.
Action
•
Inspect the installation site for moisture, loose wires or cables, and excessive dust. Make sure that airflow
is unobstructed around the router and into the air intake vents.
•
Check the status-reporting devices on the craft interface—System alarms and LEDs.
•
Inspect the air filter at the left rear of the router, replacing it every 6 months for optimum cooling system
performance. Do not run the router for more than a few minutes without the air filter in place.
RELATED DOCUMENTATION
Tools and Parts Required to Maintain the MX960 Router | 591
Maintaining the MX960 Air Filter | 592
Maintaining the MX960 Fan Trays | 592
589

Juniper MX960 Specifications

General

Power Supply	AC or DC
Redundancy	Yes
Operating System	Junos OS
Form Factor	Rack-mountable
Operating Humidity	5% to 90% non-condensing
Chassis Type	Modular
Slots	12
Interfaces/Ports	Varies with line cards
Operating Temperature	0°C to 40°C (32°F to 104°F)
Routing Engine	Redundant Routing Engines
Interfaces	Supports various interface modules