Juniper MX960 - SCBE-MX Interoperability with Existing Hardware

SCBE-MX Interoperability with Existing Hardware
The SCBE-MX was designed to be used specifically with MPC3E line cards to provide full line-rate
performance and redundancy without a loss of bandwidth. It also supports the following MPCs and routing
engines.
SupportedMX240/480/960
SCBE-MX Operating
Mode
YesDPC/MS-DPCEnhanced IP/Enhanced
Ethernet Mode Only
YesMS-MPC
YesMPC1
YesMPC2
YesMPC3
NoMPC4
YesMPC2-NG
YesMPC3-NG
No16x10GE MPC
NoMPC5
NoMPC6
NoMPC7 (480 Gbps)
NoMPC8 (960 Gbps)
NoMPC9 (1.6 Tbps)
yes
yes
yes
yes
RE-S-1300 (EOLed)
RE-S-2000 (EOLed)
RE-S-1800 (all variants)
Routing Engines
166