Juniper MX960 - Power Requirements for an MX960 Router

Table 87: AC Power System Specifications
High-Capacity
Normal-CapacityItem
All PEMs in one-feed mode
All PEMs in two-feed
mode
2+22+23+1Redundancy
1700 W4100 W1700 WOutput power
(maximum) per supply
3400 W8200 W5100 WOutput power
(maximum) per system
Table 88:
High-Capacity Second-Generation AC
Item
All PEMs in one-feed modeAll PEMs in two-feed mode
2+22+2Redundancy
2300 W5100 WOutput power
(maximum) per supply
RELATED DOCUMENTATION
MX960 AC Power Supply Description | 130
Replacing an MX960 AC Power Supply | 537
Installing an MX960 AC Power Supply | 410
show chassis power
Power Requirements for an MX960 Router
Table 89 on page 206 lists the MX960 base system and cooling system power requirements.
Table 90 on page 206 lists the FRU power requirements for Switch Control Boards (SCB), Routing Engines,
Modular Port Concentrators (MPC), Modular Interface Cards (MIC), Dense Port Concentrators (DPC), and
Flexible PIC Concentrators (FPC).
205