Juniper MX960 - SCBE2-MX Description

SCBE2-MX Description
The MX Enhanced Switch Control Board (SCBE2-MX) serves the carrier Ethernet services router and
carrier Ethernet transport markets that require higher-capacity traffic support, demanding greater interface
density (slot and capacity scale) as well as improved services. The SCBE2-MX is supported on MX960,
MX480, and MX240 routers.
The SCBE2-MX is installed vertically in the MX960 chassis and horizontally in the MX480 and MX240
chassis. The routing engine is installed directly into a slot on the SCBE2-MX (see Figure 42 on page 157).
Figure 42: SCBE2-MX
•
Junos OS Release 13.3 R1 and later
•
Name in CLI: SCBE2
Software release
•
Weight: 9.6 lb (4.4 kg) (with Routing Engine installed)
•
Width: 17 in (43.2 cm)
•
Depth: 22 in (55.9 cm)
•
Height: 1.25 in (3.2 cm) height.
SCBE2-MX Weight
and Dimensions
157