Juniper MX960 Hardware Guide

CHAPTER 27
Replacing and Upgrading Switch Control Boards
IN THIS CHAPTER
Replacing an MX960 SCB | 561
Upgrading an MX960 to Use the SCBE-MX | 566
Upgrading an MX960 to Use the SCBE2-MX | 577
Upgrading an MX240, MX480, or MX960 Router to Use the SCBE3-MX | 583
Replacing an MX960 SCB
Before replacing an SCB, read the guidelines in Operating and Positioning the MX960 SCB Ejectors.
1.
Removing an MX960 SCB | 562
2.
Installing an MX960 Switch Control Board | 564
561

Juniper MX960 Specifications

General

Power Supply	AC or DC
Redundancy	Yes
Operating System	Junos OS
Form Factor	Rack-mountable
Operating Humidity	5% to 90% non-condensing
Chassis Type	Modular
Slots	12
Interfaces/Ports	Varies with line cards
Operating Temperature	0°C to 40°C (32°F to 104°F)
Routing Engine	Redundant Routing Engines
Interfaces	Supports various interface modules