Juniper MX960 - Maintaining Components; Tools and Parts Required to Maintain the MX960 Router

CHAPTER 29
Maintaining Components
IN THIS CHAPTER
Tools and Parts Required to Maintain the MX960 Router | 591
Maintaining the MX960 Air Filter | 592
Maintaining the MX960 Fan Trays | 592
Maintaining the MX960 Host Subsystem | 595
Maintaining MX960 DPCs | 598
Holding an MX960 DPC | 600
Storing an MX960 DPC | 602
Maintaining MX960 FPCs | 603
Holding an MX960 FPC | 606
Storing an MX960 FPC | 611
Maintaining MX960 MICs | 612
Maintaining MX960 MPCs | 613
Maintaining MX960 PICs | 616
Maintaining Cables That Connect to MX960 DPCs, MPCs, MICs, or PICs | 617
Maintaining MX-SPC3 Services Card | 619
Maintaining the MX960 Power Supplies | 624
Verifying the Version of the MX960 Cable Manager | 626
Tools and Parts Required to Maintain the MX960 Router
To maintain hardware components, you need the following tools and parts:
•
ESD grounding wrist strap
•
Flat-blade (–) screwdriver
•
Phillips (+) screwdriver, number 1
•
Phillips (+) screwdriver, number 2
591