Troubleshooting the MX960 PICs
Problem
Description: The PICs are not functioning normally.
Solution
•
Check the status of each port on a PIC by looking at the LED located on the PIC faceplate. For information
about the meaning of LED states on different PICs, see the MX Series Interface Module Reference.
•
Check the status of a PIC by issuing the show chassis fpc pic-status CLI command. The PIC slots in the
FPC are numbered from 0 through 1, top to bottom:
user@host> show chassis fpc pic-status
Slot 0 Online DPC 40x 1GE R
PIC 0 Online 10x 1GE(LAN)
PIC 1 Online 10x 1GE(LAN)
PIC 2 Online 10x 1GE(LAN)
PIC 3 Online 10x 1GE(LAN)
Slot 1 Online MX FPC Type 3
PIC 0 Online 1x OC-192 SONET
PIC 1 Online 1x OC-192 SONET
For further description of the output from the command, see the CLI Explorer.
RELATED DOCUMENTATION
MX960 PIC Description | 78
Replacing an MX960 PIC | 517
Maintaining MX960 PICs | 616
MX960 PIC Serial Number Label | 690
Troubleshooting the MX960 MICs
Problem
Description: The MICs are not functioning normally.
Solution
662
To Next Page
Loading...
