Juniper MX960 - Storing an MX960 DPC

Figure 224: Do Not Rest the DPC on an Edge
If you must rest the DPC temporarily on an edge while changing its orientation between vertical and
horizontal, use your hand as a cushion between the edge and the surface.
RELATED DOCUMENTATION
MX960 DPC Terminology
Storing an MX960 DPC | 602
Troubleshooting the MX960 DPCs | 657
Replacing an MX960 DPC | 485
Storing an MX960 DPC
You must store a DPC as follows:
•
In the router
•
In the container in which a spare DPC is shipped
•
Horizontally and sheet metal side down
602