Services Processing Card (SPC) with two SPUs of 256 GB memory.
•
Power requirement: 650 W maximum
•
Weight: Approximately 18 lb (8.3 kg)
Description
•
Two 10–Gigabit Ethernet small form-factor pluggable plus (SFP+) chassis cluster control
ports for connecting multiple devices into a redundant chassis cluster.
•
Fabric interfaces
•
One Gigabit Ethernet switch that provides control connectivity to the Routing Engine.
•
Two interfaces from the SCBs that enable the boards to be powered on and controlled.
•
Physical SPC connectors
•
Midplane connectors and power circuitry
•
Each SPU includes:
•
Two 2.3-GHz CPUs
•
One Crypto Engine
•
128 GB memory
•
Two 128 GB solid state-drives (SSDs).
•
LEDs on the faceplate that indicate the SPC and SPU status.
Hardware features
•
MX240–Any slot, except the bottom slot 0 which is reserved for SCB/RE.
•
MX480–Any slot, except the bottom slots 0 or 1 which are reserved for SCB/RE.
•
MX960–Any slot, except slot 11, and slots 0 or 1 which are reserved for SCB/RE.
Supported Slots
The MX-SPC3 services card is compatible end-to-end with the following MX Series services
cards and Routing Engines:
•
MX Enhanced Switch Control Board: SCBE, SCBE2
•
MS-MPC: MX-MPC3E-3D, MPC5E-40G10G, MPC5E-100G10G, MPC5EQ-40G10G,
MPC5EQ-100G10G
Compatibility
125
To Next Page
