WARNING:
Translation from Japanese: The attached power cable is only for this product. Do not
use the cable for another product.
NOTE: In North America, AC power cords must not exceed 4.5 m (approximately 14.75 ft) in
length, to comply with National Electrical Code (NEC) Sections 400-8 (NFPA 75, 5-2.2) and
210-52, and Canadian Electrical Code (CEC) Section 4-010(3). You can order AC power cords
that are in compliance.
WARNING: The router is a pluggable type A equipment installed in restricted access
location. It has a separate protective earthing terminal (Metric [–M6] and English
[–¼-20] screw ground lugs) provided on the chassis in addition to the grounding pin
of the power supply cord. This separate protective earth terminal must be permanently
connected to earth.
CAUTION: Power cords and cables must not block access to device components or
drape where people could trip on them.
RELATED DOCUMENTATION
MX960 AC Power Supply Description | 130
Connecting Power to an AC-Powered MX960 Router with Normal-Capacity Power Supplies | 335
Replacing an MX960 AC Power Supply Cord | 554
223
To Next Page
Loading...
