5. Slide the AS MXC out of the AS MLC card carrier by pulling the handles, and place it in the electrostatic
bag or on the antistatic mat.
6. If you are not reinstalling an AS MXC into the emptied AS MXC slot within a short time, install a blank
AS MXC panel over the slot to maintain proper airflow in the AS MLC card cage.
Figure 169: Removing an AS MXC
SEE ALSO
MX960 Application Services Modular Processing Card Description | 87
Preventing Electrostatic Discharge Damage to an MX960 Router
Installing an MX960 AS MXC | 423
450
To Next Page
Loading...
