Table 119: MX960 or High-Voltage Second-Generation Universal Power Supply LEDs (continued)
LEDs
Connected Inputs PS FAILDC OKINP OK
OffGreenGreenPDM connected, power
supply connected
Note: The corresponding appliance inlet located on the power supply is the recommended receptacle when using
the power supply in one feed mode. If using the power supply in two-feed mode, also plug the second power
cord into the receptacle on the power supply.
Note: PDM in the above table stands for Power Distribution Module.
12. Repeat steps 1-12 for installing power supplies in slots 1, 2, and 3, where required.
RELATED DOCUMENTATION
MX960 Power System Overview | 129
Troubleshooting the MX960 Power System | 667
649
To Next Page
Loading...
