Juniper MX960 - Install the Router; Remove Components

Initial Installation and Configuration
3
Unpacking the MX960 Router | 249
Tools and Parts Required to Unpack the MX960 Router | 249
Unpacking the MX960 Router | 249
Verifying the MX960 Parts Received | 251
Installing the Mounting Hardware | 255
Installing the MX960 Mounting Hardware for a Four-Post Rack or Cabinet | 255
Installing the MX960 Mounting Hardware for Front-Mounting in an Open-Frame Rack | 257
Installing the MX960 Mounting Hardware for Center-Mounting in an Open-Frame Rack | 260
Installing the MX960 Router | 263
Installing an MX960 Router Overview | 263
Removing Components from the MX960 Router Chassis Before Installing It with a Lift | 265
Removing the Power Supplies Before Installing an MX960 Router with a Lift | 265
Removing the Standard Cable Manager Before Installing an MX960 Router with a Lift | 268
Removing the Fan Trays Before Installing an MX960 Router with a Lift | 269
Removing the SCBs Before Installing an MX960 Router with a Lift | 271
Removing the DPCs Before Installing an MX960 Router with a Lift | 272
Removing the FPCs Before Installing the MX960 Router with a Lift | 274
Tools Required to Install the MX960 Router with a Mechanical Lift | 275
Installing the MX960 Router Using a Mechanical Lift | 276
MX960 Acoustic Cover Installation Instructions | 278
Installing the Upper Fan Tray Cover | 279
Installing the Interface Module Cage Cover Center-Mount Brackets | 280
Installing the Interface Module Cage Cover Front-Mount Brackets | 281
Installing the Interface Module Cage Cover | 281
Removing the Upper Fan Tray Cover | 282
Removing the Interface Module Cage Cover | 282
MX960 Extended Cable Manager Installation Instructions | 283
Extended Cable Manager Description | 283
Installing the Extended Cable Manager | 285
Powering Off the Router | 286
Removing the Craft Interface | 286
ix