Krone BiG X 770-3 - Page 162

Info centre "EasyTouch"
162
5 6
7 8
B C D
BX500000
1
2
Fig. 111
The Info Centre informs you about the current actions and the current operating condition of the
machine. You can use the Info Centre to make settings for the machine and start or stop
functions.
Its main components are:
Keys 1-8 (1)
You can use keys 1-8 to make settings shown in the information area (IV). For the assignment
of the keys, see the graphic.
If there is no display next to a key, it has no function.
Keys A-D (2)
You can use keys A-D to make general machine settings shown in the information area (V). For
the assignment of the keys, see the graphic.
If there is no display next to a key, it has no function.