Krone BiG X 770-3 - Page 460

Start-up - Grass mode
460
Fig. 361
• Place the grass channel (4) in the mounting position under the machine.
• Catch the hook (1) of the cable winch in the eye (2).
• Use the cable winch to raise the grass channel (4) until the retainer hooks (3) are
approximately at the height of the receivers (5).
• Tilt the grass channel forward manually so that the retainer hooks (3) engage into the
receivers (5).
Fig. 362
• Unwind the rope (1) from the cable winch so that the grass channel hangs down.
• Release the hook on the rope (1) from the eye (2) on the grass channel.