Lexmark T652 - Page 107

Error code Description Action
238.05 Sensor (duplex input) static jam and sensor
(double-feed) static jam (external duplex)
Media remains on the sensor (duplex input) and
the sensor (double-feed) during the warm-up
sequence.
Go to
“Sensor (duplex input) lingering jam
service check” on page 102.
238.06 Sensor (duplex exit) static jam and sensor (double-
feed) static jam (external duplex)
Media remains on the sensor (duplex exit) and the
sensor (double-feed) during the warm-up
sequence.
Go to
“Sensor (duplex exit) static jam service
check (external duplex)” on page 113.
238.07 Sensor (duplex input) static jam, sensor (double-
feed) static jam, and sensor (duplex exit) (external
duplex)
Media remains on the sensor (duplex input),
sensor (double‑feed), and the sensor (duplex exit)
during the warm-up sequence.
Go to
“Sensor (duplex input) lingering jam
service check” on page 102.
239 error messages
Error code Description Action
239.00 Mechanical feed error or timing error (external
duplex)
Mechanical feed error or timing error.
Go to
“Mechanical feed error or timing error
(external duplex) service check” on page
113.
239.01 External duplex assembly error (external duplex)
Mechanical feed error or timing error.
Go to
“External duplex assembly error
(external duplex) service check” on page
114.
239.02 External duplex assembly error (external duplex)
Mechanical feed error or timing error.
239.03 Device controls response error (external duplex)
Mechanical feed error or timing error.
239.04 Input device ready response error (external
duplex)
Mechanical feed error or timing error.
239.05 Output device response error (external duplex)
Mechanical feed error or timing error.
239.06 Failed the last page of a staple job (external
duplex)
Mechanical feed error or timing error.
239.07 Select output device error (external duplex)
Mechanical feed error or timing error.
239.08 Input source ready error (external duplex)
Mechanical feed error or timing error.
4062
Diagnostic information
107