EasyManua.ls Logo

Lexmark T652 - Page 87

Lexmark T652
596 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
203 error messages
Error code Description Action
203.00 Paper jam around redrive area
Page may be jammed in redrive area.
Go to
“Paper jam around fuser exit or redrive
area service check” on page 87.
203.01 Internal duplex drive motor control failure (internal
duplex)
The internal duplex drive motor motor does not
reach the proper operating speed at the specified
time.
Go to
“Internal duplex drive motor control
failure service check” on page 92.
203.08 Redrive motor load error
The redrive motor assembly has failed or caused
high mechanical load during the warm up
sequence.
Go to
“Redrive motor load error service check”
on page 92.
203.10 Redrive motor control failure (media tray 1)
The redrive motor does not reach the proper
operating speed at the specified time.
203.18 Redrive motor assembly underspeed error
The redrive motor assembly does not rotate at the
specified speed.
203.20 Redrive motor lost encoder failure
The redrive motor is not reporting pulses back to
the engine.
Paper jam around fuser exit or redrive area service check
Action Yes No
Step 1
Check the fuser wiper cover assembly for missing parts or damage,
such as cracks. If necessary, replace the fuser wiper cover
assembly. See
“Fuser wiper cover assembly removal” on
page 332.
Does the problem remain?
Go to step 2. Problem is solved.
Step 2
Install media properly.
Does the problem remain?
Go to step 3. Problem is solved.
Step 3
Remove obstructions in media path.
Does the problem remain?
Go to step 4. Problem is solved.
4062
Diagnostic information
87

Table of Contents

Related product manuals