8-12
Version 1.73 Copyright © 1997 Link Communications Inc. 1/18/97
Macros 234..238 are called when Analog 1..5 go into a High alarm. You may want to use
these macros to speak an voice message indicating the alarm and/or take some other action such
as turning off an output line. To change how often the RLC-Club checks to see if an alarm has
occurred, see Command 020. The default is every one second.
Macro Definition
234 Analog 1, High Alarm
235 Analog 2, High Alarm
236 Analog 3, High Alarm
237 Analog 4, High Alarm
238 Analog 5, High Alarm
Macros 239..243 are called when Analog 1..5 go into a Low alarm. You may want to use these
macros to indicate an alarm condition.
Macro Definition
239 Analog 1, Low Alarm
240 Analog 2, Low Alarm
241 Analog 3, Low Alarm
242 Analog 4, Low Alarm
243 Analog 5, Low Alarm
To Next Page
Loading...